Bell 206B crash near Burlington, WA, United States

In a written statement, the pilot reported that he was returning from an aerial application flight in the local area. As he neared the flatbed trailer that he intended to utilize as his landing zone, he noticed that there was a right crosswind of about 5 knots. Just prior to touchdown he felt the helicopter move to the left and subsequently contact the trailer. He attempted to lift off from the trailer by adding right cyclic and increasing the collective. The helicopter rolled to the right, resulting in the main rotor blades contacting the ground. The main rotor blades then impacted the tail boom resulting in its separation from the fuselage. The helicopter came to rest on its right side in a nose high attitude. Examination of the helicopter by a Federal Aviation Administration (FAA) inspector revealed that the helicopter sustained substantial damage to the main rotor assembly, tail rotor assembly, and tail boom. The pilot reported no preimpact mechanical malfunctions or failures with the helicopter.